-
Nernst N6000 oxygen analyzer
Input function:
One oxygen analyzer can be connected to a oxygen probe to display the measured oxygen content in real time.
Multi-channel output control:
the analyzer has one 4-20mA current output.
Measurement range:
The oxygen measurement range is 10-38 to 100% oxygen.
Automatic dust cleaning:
The analyzer has the function of automatically cleaning the probe. The user can clean the probe regularly according to the needs, eliminating the need for manual on-site dust cleaning.
-
The Nernst N3100 Embedded Zirconia Micro-Oxygen Analyzer
Plug-in Type Rapid Response Zirconia Sensor:
The Nernst zirconia sensor employs a sheet-type zirconia ceramic welded and fastened composite technology. The sensor exhibits strong resistance to thermal shock and generally does not require calibration with standard gases (calibration with ambient air is possible). During operation, the sensor delivers high oxygen measurement accuracy, fast response speed, signal drift-free performance, and strong corrosion resistance. Actual response time is less than 100 milliseconds, with a response time to oxygen of 50 milliseconds.
Wide oxygen measurement range with high precision:
Measures trace oxygen levels from 10-30 to 100% oxygen content.
Oxygen Display Units:
Percentage content %, PPM mode, scientific notation X — E% automatic conversion.
Output Control:
The analyzer features a 4–20 mA current output channel and a computer communication interface (RS232) or network communication interface (RS485).
-
Nernst HWV water vapour oxygen probe
The probe is used in special steam ovens for food processing, paper industry, textile industry, construction industry, food processing industry and all kinds of industrial production where materials or products need to be dried.
Probe surface material: 316L stainless steel.
-
Nernst N2035 water vapour analyzer
Dual Channel Water vapour Analyzer: one analyzer can measure two channels of oxygen or high-temperature water vapor/humidity at the same time.
Measurement range: 1ppm～100% oxygen content，0～100% water vapor，-50°C～100°C dew point value，and water content (g/kg).
-
Nernst R series non-heated high temperature oxygen probe
The probe is used to directly measure the oxygen content in various sintering furnaces, mesh bag furnaces, powder metallurgy sintering furnaces, and petrochemical industries. The applicable flue gas temperature is in the range of 700°C～1400°C. The outer protective material is aluminum oxide (corundum).
-
Nernst 1937 Portable Dew Point Meter
The 1937 is a lightweight, portable meter
that provides fast field measurements for
dew point and moisture content
measurements, with built-in calibration
providing long-term stability. -
Nernst N2001 oxygen analyzer
Single Channel Oxygen Analyzer: One oxygen analyzer can be connected to a oxygen probe to display the measured oxygen content in real time.
The oxygen measurement range is 0 to 100% oxygen.
-
Nernst N32-FZSX integrated oxygen analyzer
Application range The Nernst N32-FZSX integrated oxygen analyzer is an integrated structure product. It can be widely used in the detection of oxygen content in the combustion process of various industries such as petroleum, chemical industry, metallurgy, electric power, and incineration. The Nernst N32-FZSX integrated oxygen analyzer can directly monitor the oxygen content in the flue gas of boilers, sintering furnaces, heating furnaces, etc. during or after combustion. Technical characteris... -
Nernst N2032-O2/CO oxygen content and combustible gas two-component analyzer
The analyzer mate with Nernst O2/CO probe can measure the oxygen content percentage O2% in the flue and furnace, the PPM value of carbon monoxide CO, the value of 12 combustible gases and the combustion efficiency of the combustion furnace in real time.
Automatically display 10-30～100% O2 oxygen content and 0ppm～2000ppm CO carbon monoxide content.
-
Nernst L series non-heated medium and high temperature oxygen probe
The probe is used to measure the oxygen content in various sintering furnaces, powder metallurgy sintering furnaces and heat treatment furnaces. The applicable flue gas temperature is in the range of 700°C～1200°C. The outer protective material is superalloy.
-
Nernst HGP series high pressure type oxygen probe
The probe is suitable for high-pressure steam boilers, nuclear steam boilers, nuclear power boilers. Positive pressure variable pressure 0～10 atmospheres, negative pressure variable range -1～0 atmospheres. The applicable temperature is 0℃～900℃
-
Nernst HH series high temperature jet oxygen probe
The probe is equipped with heater and injector, and the applicable temperature is 0℃～1200℃. The probe has a fast response speed, and the response time is less than 100 milliseconds.
Probe surface material: High temperature alloy steel.
Phone
