2022 Good Quality Oxygen Probe For Gas Kiln - Nernst R series non-heated high temperature oxygen probe – Litong

Short Description:

Product Detail

Product Tags

Feedback (2)

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Chemical Zirconia Probe, Oxygen Analyzer Online, Zirconia Analyzer Spot, Sincere cooperation with you, altogether will create happy tomorrow!

2022 Good Quality Oxygen Probe For Gas Kiln - Nernst R series non-heated high temperature oxygen probe – Litong Detail:

Application range

The Nernst R series non-heated high temperature oxygen probe is used to directly measure the oxygen content in various sintering furnaces, mesh bag furnaces, powder metallurgy sintering furnaces, and petrochemical industries. The applicable flue gas temperature is in the range of 700°C~1400°C. The outer protective material is aluminum oxide (corundum).

The probe can be directly connected to Nernst’s oxygen analyzer. It can also be equipped with oxygen analyzers and oxygen sensors produced by other companies. The oxygen probe can measure oxygen in a wide range, from 10^-30 to 100% oxygen content.

Specifications and technical parameters

• Model: R series non-heated high temperature oxygen probe

• Shell material: Aluminum oxide (corundum)

• Application flue gas temperature: 700°C~1400°C

• Temperature control: Furnace temperature

• Thermocouple: Type R

• Installation and connection: The probe is equipped with 3 / 4 ″ thread. The user can process the matching flange of the furnace wall according to the attached drawing in the instruction manual.

• Reference gas: The gas pump in the analyzer supplies about 50 ml/min. Use the gas for the instrument and supply the gas through the pressure reducing valve and float flow meter provided by the user. The manufacturer provides the PVC connecting pipe from the float flowmeter to the sensor and the connector at the sensor end with the transmitter.

• Gas connection pipe: PVC pipe with an outer diameter of 1/4″ (6.4mm) and an inner diameter of 4 (mm).

• Check gas connection: The sensor has an air inlet that can pass check gas. When it is not checked, it is closed by a bulkhead. When calibrating the air, the flow rate is controlled at about 1000 ml per minute. The manufacturer provides 1/8″NPT threaded pipe joints that can be connected to PVC pipes.

• Zirconium battery life: 4-6 years of continuous operation. It depends on the flue gas composition and temperature.

• Response time: less than 4 seconds

• Filter: Without filter

• Probe protection tube outer diameter: ￠20 (mm)

• Probe junction box temperature: <130°C

• Probe electrical connection: direct plug socket type or aviation plug socket.

• Weight: 0.45Kg plus 0.35Kg/100mm length.

• Calibration: After the initial installation of the system is stable, it needs to be checked once.

• Length:

Standard model	Explosion-proof model	Length
R0500	R0500(EX)	500mm
R0750	R0750(EX)	750mm
R1000	R1000(EX)	1000mm

Product detail pictures:

Related Product Guide:

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for 2022 Good Quality Oxygen Probe For Gas Kiln - Nernst R series non-heated high temperature oxygen probe – Litong, The product will supply to all over the world, such as: Belarus, Jordan, Saudi Arabia, Establish long term and win-win business relationships with all our customers, share the success and enjoy the happiness of spreading our products to the world together. Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.

Annealing Furnace Oxygen Probe